First of all, in the process of use, we must strictly operate according to the operating procedures in the instruction manual, and can not let the machine overload and operation, and must check the machinery before complaining about production or mechanical operation. Whether the parts can work normally, whether there is any fault, only when the various parts and indicators of the machine are normal, the machine can be started up and put into production, otherwise it will cause mechanical loss.
Second, after checking the various components of the high-frequency welded pipe unit, we will start up and operate again. In the production process of the machine, we must ensure the temperature of the machine and the stability of the production. If the machine fails, it must be timely. Stop production and check what is wrong with the machine, so as not to cause more damage. The main faults include unstable mechanical operation, grinding of the machine, and abnormal noise during operation. If problems occur, they should be checked in time.
Third, after the machine has been used for a period of time, we must pay attention to regular lubrication and cleaning of the machine to ensure that the machine is clean. Only then can the machine run normally and be lighter during use. Parts that are aging must be replaced in time to ensure that the machine can operate normally at any time. There is also a high-frequency welded pipe unit that should be kept well when the machine is not suitable for use.
